Precautions for nipple drinking lines for brolier soaking

Soak and disinfect the nipple drinking lines for brolier regularly every week. The operation process: shake the water line after turning off the lights, open the water discharge valve at the end of the water line → open the high pressure valve in the middle → open the dosing device/pressure tank → suck the disinfectant of the specified concentration / Drive into the water line → wait for the water with disinfectant to flow out from the end of the water line → close the high pressure valve → close the water discharge valve at the end of the water line → close the water source and the dosing device/pressure tank → soak for 30 minutes → open the open water valve and the high pressure valve in turn → Flush the disinfectant out of the water line → rinse with clean water for 20~30 minutes → close the high pressure valve → close the drain valve → finally shake the water line and adjust to a suitable level → the flushing is over.

Precautions for rinsing and soaking of the nipple drinking lines for brolier:

Immersion should shake the lift to raise the nipple drinking lines for brolier. (stop drinking water, increase stress)

Open the end drain valve and connect the water pipe to the sewage ditch.

Turn off all extra water and increase buffer pressure.

The above is the introduction to the precautions for nipple drinking lines for brolier soaking, do you all understand?