Welcome to Shandong Superherdsman Husbandry Machinery Co., Ltd.

CONTACT US

You Are Here:

The steps of purification and disinfection of nipple drinking lines for brolier

[Abstract]:
Good drinking water hygiene requires a complete set of cleaning and disinfection procedures for drinking water systems. Nipple drinking lines for brolier have a variety of structures and their status is constantly changing, all of which present challenges for waterline hygiene. However, we can solve these problems by using daily water quality information and correct cleaning and disinfection methods.

Good drinking water hygiene requires a complete set of cleaning and disinfection procedures for drinking water systems. Nipple drinking lines for brolier have a variety of structures and their status is constantly changing, all of which present challenges for waterline hygiene. However, we can solve these problems by using daily water quality information and correct cleaning and disinfection methods.

nipple drinking lines for brolier

Step 1: Analyze the water quality.

Analyze the mineral content of the scale (calcium, magnesium and manganese). If the water contains more than 90ppm of calcium and magnesium, or more than 0.05ppm of manganese, more than 0.3ppm of calcium and more than 0.5ppm of magnesium, then you must include a descaling agent or some kind of cleaning agent in your cleaning and disinfection program, these The product will dissolve mineral deposits in the waterline and its accessories.

Step 2: Choose a cleaning and disinfectant.

Choose a washer-disinfectant that will effectively dissolve biofilm or mucus in the waterline. A product with this function is a complex hydrogen peroxide solution. Before using high-concentration cleaning and disinfectant, please ensure that the exhaust pipe is working properly, so that the gas accumulated in the pipeline can be released; in addition, please consult the equipment supplier to avoid unnecessary losses.

Step 3: Configure the cleaning and disinfection solution.

For best results, use the maximum concentration recommended on the washer-disinfectant label. Most dosers can only dilute the stock solution to 0.8-1.6%. If you must use a higher concentration, make up the washer-disinfecting solution in a large tank and fill the water line without going through the doser. For example, to make a 3% solution, add 3 parts of the stock solution to 97 parts of water.

Step 4: Clean and disinfect the water line.

Filling a nipple drinking lines for brolier 30 meters long and 20 mm in diameter requires approximately 30-38 liters of cleaning and disinfecting solution. If the house is 150 meters long and has two water lines, then you need to prepare at least 380 liters of sanitizer. There should be a drain at the end of the water line, so that the drain can be opened and the cleaning and disinfection solution can be completely drained after complete cleaning.