Regular cleaning of Pan feeding Breeder equipment china is very important

The surface of the frame material of Pan feeding Breeder equipment China must be smooth. The main reason for cracking is that the material used in Pan feeding Breeder equipment China is not good enough to cause the film to be scraped, so the surface must be smooth when building materials. Use something like twine for a stab wound.

In addition, it may be that your splicing area is very narrow. Most of the splicing area is increased when splicing, which can improve the strength. After the Pan feeding Breeder equipment china is covered with a film, it should be pressed with some pressing film. In the case of the situation, it should be pressed every one or two, and the tightness of the thread should be suitable. In addition, some simple windproof barriers should be set up in the windward place, otherwise it will be easily broken by blowing.

When the welded steel frame is used in the welded greenhouse, the rust should be removed every year and the antirust paint should be painted. Otherwise, its service life will be affected and it will bring a lot of work to the operation, so try to use galvanized pipes, which are corrosion-resistant, high in strength and long in life.