Welcome to Shandong Superherdsman Husbandry Machinery Co., Ltd.


You Are Here:

Introduction of Best Breeder equipment

The cleaning methods in Best Breeder equipment include manual cleaning and mechanical cleaning. Let's take a look.

There are two types of manure removal methods in Best Breeder equipment: manual manure removal and mechanical manure removal. Common equipment for mechanical manure cleaning are: scraper type manure cleaner, belt type manure cleaner and drawer type manure cleaner. Scraper-type manure cleaners are mostly used for stepped cages and online flat cages; belt-type manure cleaners are mostly used for stacked cages; drawer-type manure cleaners are mostly used for small stacked chicken cages. The commonly used scraper type manure cleaners are divided into two types: full-stroke type and step-by-step type. It is composed of tractor (motor, reducer, sheave), wire rope, corner pulley, scraper and electric control device.

Best Breeder equipment

The scraper type manure cleaner is generally used for double row chicken cages. When one is scraping the manure, the other is in the unfavorable return stroke, so that the chicken manure is scraped to the same end of the Best Breeder equipment, and then sent out by the horizontal screw type manure cleaner. Outside the house.

The full-stroke scraper manure cleaner is suitable for short manure ditch. The stepper scraper manure cleaner is suitable for long Best Breeder equipment, and its working principle is exactly the same as that of the full stroke type. The scraper type manure cleaner uses friction and tension to make the scraper rise and fall by itself, and has a simple structure. However, the wire rope is easily corroded and broken when it comes into contact with manure and urine. Steel wire covered with high pressure polyethylene plastic for enhanced corrosion resistance. However, the plastic outer skin is not wear-resistant, and it is easy to be cut by sharp objects and lose its covering effect. Therefore, the surface of the transmission part in contact with the wire rope must be smooth and free of burrs.