Do you know all the cleaning methods of the Ventilation fan?

After the Ventilation fan has been running for a long time, the filter screen will be blocked by dust and dirt, which will affect the air volume and effect. It is recommended to clean it once every two weeks. Let's take a look at its cleaning method!
1. Unplug the power supply;
2. Loosen the screws and remove the back cover;
3. Pull out the connector, and remove the filter screen and the back cover together;
4. Reconcile with detergent and clean water to an appropriate concentration;

5. Put the filter screen and the back cover into the container, wash for 10-15 minutes and then replace with clean water for cleaning, do not immerse the small motor in water, and do not rinse the small motor with water;
6. Reinstall the filter and rear cover back to the original place. Dehumidification facilities. When filling the water cooling device, use pure water as much as possible. Purified water has high purity and few bacteria, which can reduce the growth of bacteria during the condensation process. The water in the sink should be added frequently to keep it at a safe water level, and it should be replaced regularly. After long-term operation, due to the blockage of dust and dirt, the air volume and cooling effect of the filter screen and the air curtain will be affected. Therefore, it is recommended to clean it every two weeks.
The above is a brief introduction to the knowledge about the cleaning method of the Ventilation fan.